Industrietechnik Vignette Neu Book 88x100px



Schwalenberg Aetztechnik 17054 0392

Exact surface textures and precise contours down to the smallest details: with fine laser and etching technology, we offer you the best of two technology worlds.

 

Etching technology

In the etching process, an acid dissolves the unprotected areas of a metal surface to create a predefined component. Materials used for this purpose include steel, CK steel and tool steel, stainless steel, nickel, nickel silver, copper, brass and bronze. Special materials such as gold, silver, titanium, aluminium and molybdenum are used as well.

Etching technology meets the highest demands in regards to quality standards. Minimal tolerances can be met even with extremely low material thicknesses of just 0.003 mm. From prototypes to large series, you benefit from the low cost of this method regardless of the quantity. Data and drawings are prepared using computer systems. Virtually any contour can be fabricated according to your models, absolutely free of burrs. The base material is not subject to any thermal changes whatsoever. This results in premium components with maximum cost effectiveness.

Standard materials
· Steel
· CK steel and tool steel
· Stainless steel, e.g. 1.4301/1.4310/1.4571
· Nickel, nickel silver (CuNi18ZN20)
· Copper, brass, bronze
· Copper-beryllium

Special materials
· Gold, silver, titanium
· Aluminium (AL99 + AlMG 3)
· Molybdenum

Benefits of etching technology:
· Low tool costs (film costs)
· Absolutely free of burrs
· No thermal alteration of the material
· Material thicknesses: from 0.003 to 1.0 mm

Tolerances: smallest possible tolerance +/- 0.01 mm depending on the material thickness

Schwalenberg Aetztechnik 17054 0391 1Schwalenberg Aetztechnik 16025 068Schwalenberg Aetztechnik 17054 0391 2

Schwalenberg Aetztechnik 17054 0391 1Schwalenberg Aetztechnik 16025 068Schwalenberg Aetztechnik 17054 0391 2

Fine laser technology

Small quantities can also be produced cost-effectively with minimal tolerances and high precision using fine laser technology. In addition to the etching technology materials such as steel, stainless steel, nickel, nickel silver, copper, brass or bronze and the special materials gold, silver, titanium, aluminium and molybdenum, technical ceramics are processed as well. Naturally we also apply the highest quality standards in precision cutting the finest contours, even with minimal material thicknesses.

Standard materials
· Steel
· CK steel and tool steel
· Stainless steel, e.g. 1.4301/1.4310/1.4571
· Nickel, nickel silver (CuNi18ZN20)
· Copper, brass, bronze· Copper-beryllium

Special materials
· Gold, silver, titanium
· Aluminium (AL99 + AlMG 3)
· Molybdenum
· Technical ceramics

Advantages:
· Small quantities with very high precision at competitive prices
· Low production costs· Very high precision
· Material thicknesses: 0.005 to 3.0 mm

Tolerances: +/- 0.002 mm depending on the material thickness

Schwalenberg Aetztechnik 17054 0391 1Schwalenberg Aetztechnik 16025 068Schwalenberg Aetztechnik 17054 0391 2

The fields of application for etching as well as fine laser technology are diverse. One of the two technologies is chosen according to the application and requirements. We assist you with that choice. Some key applications are:

· Shims
· Shielding housings
· Conveyor belts
· Screens
· Code disks
· Covers
· Spring boards

 

abbinder schauenburg en

© 2018 Schwalenberg Industrietechnik GmbH